Home  
    Contact Us  
    Enquiry  
    SiteMap  
I CORE BUSINESS I PRODUCTS I CONTACTS I SERVICE I BROCHURE I SOLAR DIVISON
 
 
  :: Conformal Coating Systems - SCS Precision Coat  
 
 

SCS Precisioncoat
The SCS Precisioncoat spray and dispense system precisely applies 100% solids, solvent-based and water-based coatings, such as photo-resists, acryclics, adhesives, solder mask and anti-microbial coatins, to virtually any surface or substrate, with maximum accuracy. Common coating applications include.

•  Circuit board assemblies
•  Semiconductors
•  Fuel cells
•  Gasketing
•  MEMS
•  Wafers
•  Photovolatic arrays

 

The Precisoncoat's standard configuration applies coatings with a three-axes system with an accuracy of 0.001 inches. Fouth and fifth axes can be added for tilt and rotate functionality. The Precisioncoat is controlled by proprietary software on a Windows® operating system and features convenient offline progarmming and file backup.
Optional features, including programmable tilt and rotate, fiducial recognition, needle calibration and barcode reader capability, are available to maximize efficiency and meet any production requirement.The system can also be tied to an integrated manufacturing system by means of SMEMA transfer standards. The SCS Precisoncoat has spray booth door and exhaust interlocks for safety.

 

Standard Features
•  3-axes system
•  On-board PC (Windows® - based)
•  Flat screen monitor
•  0.001 in / 0.025 mm positioning accuracy
•  Offline programming
•  Brushless AC motors
•  Time / pressure volume control
•  Spray booth door interlock
•  Exhaust interlock
•  Dual board stop
•  Left to right coneyor travel

Optional Features
•  Tilt and rotate (pneumatic four postion or programmable)
•  Vision system (fiducial or pattern recognition)
•  Needle calibration
•  Barcode reader
•  Oin chain conveyour (manual or automatic width adjustment)
•  Right to left conveyour travel
•  Variety of spray and dispense heads, including ultrasonic
•  Pressure pots:
   1 qtr; 2, 5 and 10 gal / 950 ml; 7.6, 18.9 and 37.9 L
•  Pot weighing station
•  Low level alarms
•  Metering punp
•  Multiple dispense heads
•  UV and thermal cure interface
•  Head - cleaning system
•  Solvent and air purge capability
•  Shot pin fixture immobilization

   
 

SCS Precisioncoat Specifications

Minimum substrate size

2 x 2 in / 5.08 x 5.08 cm

Maximum substrate size

20 x 20 in / 50.8 x 50.8 cm

Maximum substrate height

4 in / 10.2 cm above and below pass line

Electrical

110 VAC, 10A (alternate electrical configurations available)

Exhaust requirements

120 CFM exhaust with 6 in / 15.2 cm duct

Air supply

10 CFM @ 80 psi dry air (some moisture-sensitive materials may require use of nitrogen instead of clean, dry air)

System dimensions (W x D x H)

41.5 x 51.9 x 68.8 in / 105.4 x 131.8 x 174.8 cm

Weight, skidded

700 lb / 317.5 kg

 

 

 
 
The SCS Precisoncoat is mechanically accurate to 0.001 inches
 
 
The optional fourth and fifith axes offer tilt and rotation for spray
and dispense application
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
About Us   I  Principals  I  Products   I  News & Updates   I  Services  I  Enquiry   I  Contact Us   I  Our Customer   I  Career   I   Download Brochure   I  Sitemap   I  CC TV Login
 

No.7/4, 1st Main Road,Leo Muthu Street, Kalaimagal Nagar,
Ekkaduthangal, Chennai - 600032
Copyright 2013 by INETEST.CO.IN. All rights Reserved. Mail : india.sales@inetest.co.in

    Web Presence By CFCS