• Sine (Pk) :  3,800 kgf (8,360 lbf)
• Vertical Load Support:  500 kg (1100 lbs) 
• Random (RMS):  3,800 kgf (8,360 lbf) 
• Table Diameter:  440 mm (17 “) 
• Shock (Pk) : 7,600 kgf (16,720 lbf) 
• Load Attachment Points (Standard):  1@0;8@100;8@200;8@300 
• Usable Frequency:  DC to 2,700 Hz ; M10,3/8 
• Maximum Displacement (p-p):  100mm (4’’) 
• Degauss Coil:  Standard 
• Stray Flux Density @6 inch (152 mm) above table:  < 1 mT (10 gauss) 
• Maximum Velocity:  2 m/s (78.7 in/s) 
• Maximum Acceleration:  85 g 
• Overall Dimensions:  1270 mmL×980 mmD ×1135 mmH (50’’L × 38.5’’D × 44.6’’H) 
• Fundamental Resonance Frequency (Bare table):  2,400 Hz (nom.) +/- 5% 
• Body Suspension Natural Frequency (Thrust Axis):  2.5 Hz 
• Weight of Shaker (Uncrated): 2,500 kg (5,500 lbs) 
• Armature Effective Nominal Weight: 45 kg (100 lbs) 
• Compressed Air Requirement:  0.6 Mpa (87 psi)

Power Amplifier Specifications

• Rated Output Capacity : 60 KVA ( Specially high for ARAI requirement ) 
• Signal to Noise Ratio:  Greater than 65 dB 
• Amplifier Efficiency : Greater than 90%

Blower Specifications ACU153 

• Blower Power (Full Load): 15 kW (20 HP) 
• Air Flow Rate Air Flow: 1.1 m 3 /s 
• Air Pressure: 7.7 KPa 

System Environmental Requirement 

• Operating Room Temperature 0 to 45 degree C 
• Humidity 0 to 85%, non condensing 
• System Continuous Duty not less than 7 hours at the full ratings 
• Power Supply Requirement 380/415/480 VAC, 50 Hz, 3Ph, 48 KVA 

SYSTEM OPTIONS 

• Slip Table Configuration 
• V-Groove Caster and Rail System ●Table Inserts